This is Richard, author of this blog post

Step One

1. Using a jack-hammer, the basement floor is opened adjacent to the wall. A trench is excavated. The width is determined by the width of the foundation footing. The depth is limited since it may not be lower than the bottom of the footing.

Step Six

6. From the submersible pump, a discharge line is run up the wall. Through a drilled hold in the wall, the discharge line is extended. 7. Bentonite may be dry-poured through holds drilled approximately three feet apart on exposed exterior portions of the sub-soil masonry. When Bentonite mixes

Our Services

Bonded's proven solutions take care of water problems, mold infestation, pump installation and replacement, air filtration, and dehumidification problems in your house, all expertly diagnosed and professionally done. Business Owner? Don't forget to ask about our commercial solutions.